Chargers for ColorMaker Series Devices
Device
Charger
Technology
D1210 BT125, BT10Bank Lead Acid
D1220 BT125, BT10Bank Lead Acid
D1240 BT125, BT10Bank Lead Acid
DL75 NMCH100 Ni-MH
Octagon BT125, BT10Bank Lead Acid
CB2420 BT125, BT10Bank Lead Acid
BT10 Bank charger and single BT125 are manufactured by Battery Tender and all warranties are handled by Battery Tender. ColorMaker is a distributor only. Please read information below on custom cables offered by ColorMaker.

PDF COPY

BT 10 Bank

Technology : Lead Acid

Production charger 10 outputs @ 2 amps

BT125

Technology : Lead Acid

Single output charger @ 1.25 amps

NMCH100

Technology : Nickel Metal Hydride

Single output charger @ 1.0 amps


Battery Tender Charger Cables

ColorMaker is a distributor for Battery Tender which manufactures the 10 bank charger and the single port 1.25 charger. All charger warranty are supported by Battery Tender and ColorMaker is not responsible for charger defects.

ColorMaker offers custom cables that will connect to the 10 port charger without the need to alter the charger in any way that will void warranty. The 10 bank chargers are shipped from Colormaker with Battery Tender factory cables. ColorMaker will also supply 10 custom cables which the user will be required to install. Its an easy process which will require a Phillips screw driver and can be done in less that 5 minutes.

The ColorMaker custom cables have not been approved by Battery Tender and therefore will be considered altering the charger if warranty repair is requested. To avoid warranty issues just install the original factory cables before shipping charger to Battery Tender.

ColorMaker also offers a custom cable for the BT125 charger. DO NOT send this cable when shipping the charger to Battery Tender for warranty repairs or Battery Tender will deny warranty.

Contact Deltran Corpertaion for warranty information

Deltran Corporation801 International Speedway Blvd.Deland, Florida 32724